Proper Watering Techniques
In Manitoba, we have to change our watering practices to match the weather. If we are having a cool, rainy stretch of weather you may not need to water at all. If we are having a hot, dry stretch of weather your plants will obviously need more water. During the hottest days of summer it is possible for your plants to get stressed because of the heat. Remember to always water in the morning or evening, never in the heat of the day. This will reduce wasted water and prevent even more plant stress.
Plants that are newly planted require more consistency in watering. It takes about 3 years for perennials and most shrubs to get to their mature size. It takes trees, depending on the species, many years. During the initial year(s), the plant is putting a lot of energy into root formation. In order to remain healthy and flourish, they need to be getting adequate water down to the roots.
Follow these techniques for watering in a variety of conditions to keep your plants healthy:
One of the most commonly asked questions, especially during a time of hot temperatures and infrequent rains, is, “How long and how often should I water my plants?” There is not one simple answer to this question. It depends on a number of factors and will vary depending on them. The one constant is that you want the soil to remain somewhat moist. You can compare the soil to a sponge- you don’t want it bone dry, or dripping wet. When watering, you want the plants to receive enough water to replenish the moisture throughout the plant into the root zone.
The same plant in different locations can require very different watering practices. You must tailor your watering to the conditions and the plant. Obviously, a location that receives afternoon sun is going to dry out faster than somewhere that only receives morning sun. Clay soil holds onto moisture and drains slowly. Sandy soils drain quickly and do not hold onto moisture. Loamy soils have a high concentration of organic material in them, drain appropriately and stay moist longer. If you are uncertain the type of soil you have, dig a hole and fill it with water. If the water does not stay in the hole at all but drains almost as quickly as you fill it, you have sandy soil. If the water stands for a long time in the hole, taking hours to over a day to drain, you have clay soil. Amending clay or sandy soil annually with organic materials such as compost, peat moss, topsoil will help add nutrients as well as change its composition, over time, so it drains more appropriately. Simply amending the hole you plant in does not make a significant enough change to dramatically affect watering technique.
The best way to determine when to water is by checking a few of the plants in each type of condition. Push the mulch away from the base of the plant and dig down a few inches with a trowel. If the soil is crumbly, you need to water. If it is squishy no need to water for awhile. If it is lightly moist, check again in a day or two. You will find you need to water some areas more frequently than other areas. Remember– there is no “one answer fits all conditions” in terms of watering. Keep in mind too that if you have clay soil, even if the soil near the top of the plant feels dry, the base of the plant may be very wet. It would really help to test how quickly things drain in your yard and utilize that to help you determine the optimal watering schedule.
Plants benefit most from slow, deep watering. This is most effectively achieved via soaker hoses or drip irrigation. Overhead watering is less effective, can promote disease and fungal problems and wastes water. On hot, windy days, you can lose over 50% of the water due to evaporation and runoff before it even gets to your plants. In-ground irrigation systems that are set to water your lawn are not appropriate to water most perennials, shrubs and trees. The perennials usually get too much water, and the shrubs and trees usually do not get enough. You run into similar problems with hand watering. You are very likely not giving the trees and shrubs enough water. If your only option is to water by hand, for trees and shrubs it is better to just place a hose at the base of the plant, turn the water down to a trickle, and leave it on each plant for 15-30 minutes (depending on the type of soil you have and how dry it has gotten since the last watering). That will allow the water to fully saturate the plant’s roots. If you are using soaker hoses or a drip system, the type of soil you have will also be important in determining how long to leave them on. If you have well draining soils, several hours is okay; for poorly draining soils 1 hour. If you are using overhead sprinklers, put them on for a set length of time (30 minutes or 1 hour) and check a few plants to determine how deeply watered they are. Use this to set up an appropriate schedule.
Mulching your plants with bark, straw, or compost products will help retain moisture and thus reduce the amount of watering you will need to do. See our section on Mulching for more information.
Evergreens need to be watered until the ground freezes. The leaves will have fallen from your perennials and bushes by this time and will not require additional watering. If you have an in-ground system, have a plan in place to get water to your evergreens once the system has been shut off. Because evergreens have needles, they lose moisture through them during the winter. If they do not have an adequate supply of water going into the winter, come spring, they may be dead.